Engineering Homework Help

IT 341

undefined

Skills Exam II

undefined

Instructions:

undefined

You have been provided with the required addressing table and network topology in a pkt file. Follow the instructions and

undefined

Deliverables:

undefined

Zipped folder containing:

undefined

Device	Interface	IP Address	Subnet Mask	Default Gateway
R1	Gi0/0	11.11.11.1	255.255.255.0	NA
	S0/0/0	14.14.14.1	255.255.255.252	NA
	S0/0/1	12.12.12.1	255.255.255.252	NA
R2	S0/0/0	23.23.23.1	255.255.255.252	NA
	S0/0/1	12.12.12.2	255.255.255.252	NA
R3	Gi0/0	33.33.33.1	255.255.255.0	NA
	S0/0/0	23.23.23.2	255.255.255.252	NA
	S0/0/1	34.34.34.1	255.255.255.252	NA
R4	Gi0/0	44.44.44.1	255.255.255.0	NA
	S0/0/0	14.14.14.2	255.255.255.252	NA
	S0/0/1	34.34.34.2	255.255.255.252	NA
PC1	NA	11.11.11.2	255.255.255.0	11.11.11.1
PC3	NA	33.33.33.2	255.255.255.0	33.33.33.1
PC4	NA	44.44.44.2	255.255.255.0	44.44.44.1

undefined

Task 1: Configure Basic Device Settings (10 Points)

undefined

Step 1: Setup host name for the routers as given in the topology.

undefined

Step 2: Setup enable password: class

undefined

Step 3: Setup line console password: cisco

undefined

Task 2: Configure and verify OSPF Routing (40 Points)

undefined

Step 1: Configure OSPF as the routing protocol on all four routers and advertise the appropriate networks using the network statement. (hint: determine the connected networks for each router and advertise them through OSPF.) You need to use PROCESS ID: 100 and Area: 0 in your OSPF configurations. (15 points)

undefined

Step 2: Prevent routing updates on the interfaces of R1 on which routing advertisements are not required. (hint: you should use passive-interface command for the LAN interface.) (10 points)

undefined

Step 3: Verify that OSPF is running on the routers. Which command would you use to confirm that OSPF is running? (10 points)

undefined

Step 4: Examine the routing tables on all routers. What command should you use to examine the routing table content? (5 points)

undefined

Task 3: Configure Static Routing (30 Points)

undefined

Step 1: From R4 OSPF configuration, remove the LAN network 44.44.44.0/24.(5 points)

undefined

Step 2: Configure static routes on R1 and R2 to reach to network 44.44.44.0/24 with S0/0/0 as the next hop. (10 points)

undefined

Step 3: Configure static route on R3 to reach to network 44.44.44.0/24 with S0/0/1 as the next hop. (5 points)

undefined

Step 4: Verify the routing configuration by viewing the routing tables of R1, R2 and R3. How can you confirm from the routing tables that all static routes have been added correctly? (10 points)

undefined

Task 4: Saving your Configurations and Restart the Devices (5 Points)

undefined

• Save your configuration by using the proper save command on the routers. Now, click on ‘Power Cycle Devices’ to restart the network. Please make sure to save your configuration before restarting your devices.

undefined

Task 5: Verify Connectivity (15 points)

undefined

• To verify connectivity, you should be able to ping between all the devices.

undefined

From	To	Fail/Pass
PC1	PC3
PC1	PC4
PC3	PC4